Mitsubishi
make submerged type
model FA10 VSM (high
speed) / FM 20 VSM (high accuracy)
|
|
FA 10 VSM |
FA 20 VSM |
| THE MACHINE HAS FOLLOWING OUTSTANDING TECHNICAL FEATURES : |
| * 64 Bit CNC Controller with high speed processing capability with graphic display. |
| * The wire guide is Closed Circular Type for obtaining very high accuracy. |
| * The best possible shape accuracy that can be achieved is less than + 3 microns in 4 cuts. |
| * The
maximum machining speed is 500 square mm/ min using 0.36
mm dia special wire on 60 mm thick SKD-11 material. |
| * Anti
Electrolysis Power Supply is provided as standard. This
helps in minimizing heat-effected zone, prevents corrosion, suitable for carbide machining without micro cracks and increased ion exchange resin life. This feature is capable of being applied in all conditions from rough to finish. |
| * The Power Feeder is Circular Type and possible to Index 48 times. |
| * Corner Master function is provided as Standard to improve corner accuracy. |
| * HL Circuit is provided as standard to improve the straightness of the machined work piece. |
| * PM Function which is Adaptive Control is provided as standard . |
| * The minimum drive unit is 0.05 micron. |
| * Motorized Lubrication System is provided. |
| * Self Diagnostic Function is provided. |
| * Off Line Automatic Programming Software MEDIAPT CAD/W with DXF file can be offered optionally. |
| * Dielectric Fluid Temperature Control Unit is provided. |
| * All
Axes ( X,Y,U,V,Z) , Absolute Control System is provided
to enable high accuracy positioning without returning to zero point after power failure. |
| * Auto Wire Threading Unit Time is less than 10 seconds. Minimum start hole Ø 0.5 mm. |
| * For X, Y axes Linear Scales are provided with resolution of 0.1 micron. |
| * Fine Finishing Circuit to achieve very good surface finish without insulation jig. |
Machine Specifications for Mitsubishi make series
- wire - cut EDM systems
| Model | Units | FA10VSM | FA20VSM |
| Maximum workpiece dimensions (WxDxH) | (mm) | 800X600X215 | 1050X800X295 |
| Maximum workpiece weight | (kg) | 500 | 1500 |
| Table dimensions (WxD) | (mm) | 590X514 | 780X630 |
| Machining range (X x Yx Z) | (mm) | 350X250X220 | 500X350X300 |
| Wire Diameter | (mm) | 0.1~ 0.36 | 0.1~ 0.36 |
| Automatic Wire Feeder | (mm/min) | Standard | Standard |
| Maximum Workpiece Thickness | (mm) | 220 | 300 |
| Minimum Hole Diameter | (mm) | 0.5 | 0.5 |
| Taper Machining Unit | Standard | Standard | |
| Z axis device | (mm) | Standard | Standard |
| Maximum taper angle | (°) | 15 | 15 |
| Maximum Output Current | 50A | 50A | |
| CRT display | 10.4 - inch color LCD(TFT) | 10.4 - inch color LCD(TFT) | |
| Minimum Drive Unit | (um) | 0.05 um | 0.05 um |
| CNC Controller | Mitsubishi 64 bit | Mitsubishi 64 bit |
Home
| Profile
| Feedback
Designed
& Hosted by : MID Promoted
by : GID