| * 64
Bit CNC Controller with high speed processing capability
with graphic display. Memory capacity 10 MB |
| * The wire guide is Closed Circular Type for obtaining very
high accuracy. |
| * The best possible shape accuracy that can be achieved is less
than + 3 microns in 4 cuts. |
* The
maximum machining speed is 325 square mm/ min using 0.3
mm dia special wire on 60 mm
thick SKD-11 material. |
* Anti
Electrolysis Power Supply is provided as standard. This
helps in minimizing heat-effected zone,
prevents corrosion, suitable for carbide machining
without micro cracks and increased ion exchange resin
life. This feature is capable of being applied in all
conditions from rough to finish. |
| * The
Power Feeder is Circular Type and possible to Index 48
times. |
| * Corner
Master function is provided as Standard to improve corner
accuracy. |
| * HL
Circuit is provided as standard to improve the straightness
of the machined work piece. |
| * PM
Function which is Adaptive Control is provided as
standard . |
| * The
minimum drive unit is 0.05 micron. |
| * Motorized
Lubrication System is provided. |
| * Self
Diagnostic Function is provided. |
| * Off
Line Automatic Programming Software MEDIAPT CAD/W with DXF
file can be offered optionally. |
| * Dielectric
Fluid Temperature Control Unit is provided. |
* All
Axes ( X,Y,U,V,Z) , Absolute Control System is provided
to enable high accuracy positioning without
returning to zero point after power failure. |
| * Auto
Wire Threading Unit, threading time is less than 10
seconds minimum start hole Ø 0.5 mm. |
