| Some
to the Outstanding Features of Falcon Model 3060 VMC are as
follows: |
| * 20 HP High torque
AC Spindle Motor provided as standard. |
* Spindle Oil Cooler
(chiller-unit) provided as standard to control the temperature
and reduce the thermal
deformation. |
| * Spindle Speed is 60-6000
RPM standard. |
* The spindle is
supported by 4 Class 7 (P4) angular contact ball bearings
in front & 2 class 7 (P4) angular contact
ball bearing at the back. The spindle design is based on
high speed & high precision. The spindle is assembled in
dust proof & temperature controlled clean room. |
* Floating Type
configuration is employed in the tool unclamping mechanism. The
unclamping force is supported by
main machine structure. This feature increases spindle
bearing life. |
| * The Z-axis counter
weight system helps in preventing the tool from digging inside
the job on power failure. |
* The machine structure
is highly rigid & stable. The major parts of the
machine are made up of high quality FC 30
casting. |
| * The X, Y &
Z-axis has box type guide ways, which allows very stable &
heavy-duty cutting. |
| * A heavy-duty 4-track
saddle guide way design distributes weight evenly to reduce
slide deformation. |
| * All slideways are hardened
& ground to ensure accuracy. |
| * Heat Exchanger for
electric cabinet provided as standard. |
| * High efficient Automatic
Lubrication System provided as standard. |
* All the 3 axes employ
C3 Class High Precision 50 mm Ball screw supported by class
7-(P4) 60 degree angular
contact thrust ball bearing. The ball screws are directly
coupled to axes feed motors. Pre-tensioned ball screws
reduce thermal deflection. Ball screws and axis servo
motor are connected by flexible couplings which ensure
high transmission efficiency & minimum backlash. |
| * The Positioning &
Repeatability Accuracy of the machine are within +- 5 microns
and +- 3 microns respectively. |
| * Less power
consumption and hence reduced Operating Cost. |
| * 24 Tools Arm type
Rapid ATC is provided as Standard. Machine can also be
supplied without ATC if required. |
